Graco EnDure Instruction Manual page 10

Installation
Connecting the Electrical Cable from a
Therm-O-Flow Plus Heated Hose
1. Wrap the hose cable around the hose one time.
Connect the electrical cable from the hose to the
valve cable; lock the metal clip on the top of the
connector. See Fig. 5.
2. Place the flat side of the cable connection against
the hose, making sure the metal clip faces away
from the hose. This will prevent damage to the hose
from the clip rubbing against it. See Fig. 6.
3. Secure the cable connector to the hose with heavy
tape or Velcro straps. For installations where the
dispense valve is moving, it is recommended that
the connector be wrapped with the Graco accessory
Velcro wrap (198422) and 2 Velcro straps (198442)
as shown in Fig. 7.
Fig. 5 ______________________________________
10
Fig. 6 ______________________________________
Fig. 7 ______________________________________
309376L