Perfect Prime CO2008 User Manual

CO2008 - Indoor Air Quality CO2,
Temperature and Humidity Meter
User Manual
cs@perfect-prime.com
PRODUCT REGISTRATION
PRODUCT INTRODUCTION
Excessive carbon dioxide in an indoor environment may result in
human fatigue, loss of concentration or even cause health
hazards.
Whereas in plant growing facilities carbon dioxide level
monitoring and control can help increase growing efficiency.
Perfect Prime CO2008 Indoor Air Quality (IAQ) - CO2 ;
Temperature and Humidity meter is designed specifically for
these various health conscious and professional applications.
CO2008 is well suited for use in :

Home / Villas / Resorts

Offices / Classrooms / Meeting rooms

Hotels / Exhibition Halls / Hospitals

Department Stores / Bars / Restaurants / Theaters

Airports / Train Stations
PRODUCT PACKAGE
The product packing contains :
 CO2008 CO2 and Temperature / Thermometer Meter

AC Power Adapter (100 - 240V AC Input / 9V DC Output)
OPERATING PREPARATION

Connect the DC output plug of AC adapter to the DC input
socket of CO2008

Plug the AC Power adapter to an AC power source and CO2008
would turn on automatically, a short countdown would be
showed (around 20 seconds)

CO2008 would then function and display the measured CO2 /
Temperature and Humidity values on the front LED display
PRODUCT FEATURES AND FUNCTIONS
CO2 Concentration Effect (General Guideline – Reference only)
 250 ~ 350 ppm – Only under controlled environment
 350 ~ 450 ppm – Similar to nature's outdoor air quality
 450 - 1,000 ppm - Typical good quality environment
 1,000 ~ 2000 ppm – Air flow is limited and may feel sleepy
 2,000 ~ 5,000 ppm – Bad air quality, may cause headache,
sleepiness, less concentration, faster heartbeat and mild
nausea.
 > 5,000 ppm – May cause serious health issues, possibly lead
to brain damage, coma and even casualties.
DC Plug
There are 5 push buttons at the back of CO2008 and their functions
are (Stating from the top button downward) :
 Mode Key : Set carbon dioxide concentration alarm level,
press MODE key to check the CO2 alarm level, if measured
CO2 concentration is higher than alarm level, the buzzer coil
sound until CO2 concentration is reduced.
 Up Button & Down Button: Increase / decrease buttons for
CO2 alarm level. When CO2 alarm level is displayed by
pressing MODE key, pressing button 2 or 3 would increase or
decrease the alarm level respectively.
 ON / OFF setting for alarm : Press this key to turn ON/OFF
buzzer alarm of CO2 warming.

Temperature Display - setting between °C and °F unit : Press
switch 5 for switching temperature display between Celsius or
Fahrenheit unit respectively.
DISPLAY REPRESENTATION
OPERATING INSTRUCTIONS