Connecting The Wastewater System; Leakage Test; Maintenance - Viega 6960 Instructions For Use Manual

3.2.2

Connecting the wastewater system

3.2.3

Leakage test

3.3

Maintenance

Tempoplex Plus drain, high drainage capacity
Proceed as follows to connect the drain to the wastewater system:
Requirement:
n The drain unit is installed onto the shower tray.
Turn ball joint drain socket until the required position has been
reached.
Push wastewater pipe onto the drain socket.
The leakage test is only carried out as a visual inspection.
Check drain fitting for visible leaks.
NOTICE!
Risk of damage due to unsuitable cleaning agent.
The following cleaning agents can damage chrome-plated
surfaces and therefore may not be used:
– scouring agent
– abrasive sponges
– lime, plaster or cement dissolver
– solvents or other acidic cleaning agents
Normal soap or a mild cleaning agent can be used for regular care and
prevention of lime scale on the rotatable rosette and valve cone. Under
no circumstances should scouring agent or scratching objects be used.
Strong stains, even around the drain unit and the siphon, can be
removed using typical household cleaner. It should be noted that the
cleaning agent should be rinsed off after the prescribed soaking time.
There should be no residue on the components.
Handling
11 from 13