Table of Contents
Advertisement
Patient List on Programmer and the PDMS on a PC
•
EC
G C
O
APTURE
them here. You can adjust ECoG capture settings only using the tablet during an interactive
programming session. See Set up ECoG Capture on page 38.
Figure 76 ECoG Capture screen through the patient list—review current settings only
A
CTIVITY
The A
screen is a reporting screen only. It looks and behaves as shown and explained under
CTIVITY
Activity Screen starting on page 23.
EC
G L
O
IBRARY
The EC
G L
O
IBRARY
under ECoG Library Screen starting on page 29.
L
EC
G
IVE
O
S
The Live ECoGs tile is inactive through the patient list and the PDMS via the Internet. It can be active
only on the tablet, provided it is in communication with a neurostimulator, as described under Live
ECoGs Screen starting on page 31.
®
RNS
System Programming Manual
screen: This screen reports the current capture settings. You cannot adjust
screen is a reporting screen only. It looks and behaves as shown and explained
90
Advertisement
Table of Contents
