Advertisement
Quick Links
PTFE HOTPLATE
CP300
Instructions for use
This product meets the applicable EC harmonised standards for
radio frequency interference and may be expected not to interfere
with, or be affected by, other equipment with similar qualifications.
We cannot be sure that other equipment used in its vicinity will meet
these standards and so we cannot guarantee that interference will
not occur in practise. Where there is a possibility that injury, damage
or loss might occur if equipment malfunctions due to radio frequency
interference, or for general advice before use, please contact the
.
Technical Department of Bibby Sterilin
Version 1.1
Advertisement
Related Manuals for Stuart CP300
Summary of Contents for Stuart CP300
- Page 1 PTFE HOTPLATE CP300 Instructions for use This product meets the applicable EC harmonised standards for radio frequency interference and may be expected not to interfere with, or be affected by, other equipment with similar qualifications. We cannot be sure that other equipment used in its vicinity will meet these standards and so we cannot guarantee that interference will not occur in practise.
- Page 2 Heater on light Hot warning light Hot warning light Temperature Mains indicator light control knob Hotplate inlet Main IEC inlet socket socket...
- Page 3 Use in a well ventilated area Model Power Fuse w Ambient temperature range +5°C to +40°C CP300 900W w Altitude to 2000m Fuse fitted in both live and neutral lines. w Relative humidity not exceeding 80% w Mains supply fluctuations not exceeding...
- Page 4 Position the control unit in the area it is to be If in any doubt, please contact the Technical used (e.g. outside the fume hood). Service Department of Bibby Sterilin Ltd. or the point of sale. Turn the unit ON using the temperature control knob and select the temperature of the hotplate Bibby Sterilin Ltd by using the printed scale around the knob.
Need help?
Do you have a question about the CP300 and is the answer not in the manual?
Questions and answers