Comment; Extras; File Operation - WIKA CPT2500 Instruction Manual

Pressure sensor CPT2500 with USB adapter CPA2500 and USBsoft

5.3.6 Comment

As soon as the data have been read you may enter your com-
ments here. If data are saved as a file, the comment will also
be saved in the same file automatically.
Furthermore there is the possibility to load recurrent comments
in form of a template.
To do so, enter a suitable text-file (only .txt-format!) via button
"change". Via button "load template" the text will be loaded
manually to the window. If "load automatically" is activated, the
previously selected text file is loaded automatically, whenever
data is read out.
The comment can be edited afterwards as usual.
When "load automatically" activated, "overwrite existing com-
ment" is selectable. This function overwrites the existing com-
ment, when a new record is started.

5.3.7 Extras

This register permits adjustment options for the recording.
With "unit", pressure unit of the transducer can be set.
If necessary, Offset and Scale can be corrected.
The low pass filter provides the possibility for suppressing pressure
peaks.

5.4 File Operation

For viewing or analysing, saved data can be reloaded by performing the following steps: Select "File /
open..." and open the corresponding file.
Export Files
The data files can be saved as ASCII (=text) – file to view them for example in word processing or in a
spread sheet program. Select the required data window and choose „file / export ..." at the menu. Pay
attention particularly at spread sheets to make right settings in the following „export files" pop-up win-
dow.
WIKA Operating Instructions, model CPT2500 11