ABB Aztec AWT440 Commissioning Instructions page 18

Log icons
Source: sensor 1 (red)
S1 T1
S1 = sensor 1 process value.
T1 = sensor 1 temperature.
Source sensor 2 (green)
S2 T2
S2 = sensor 2 process value.
T2 = sensor 2 temperature.
Source sensor 3 (blue)
S3 T3
S3 = sensor 3 process value.
T3 = sensor 3 temperature.
Source sensor 4 (violet)
S4 T4
S4 = sensor 3 process value.
T4 = sensor 4 temperature.
Power failed / power restored.
Configuration changed.
System error.
File created / deleted.
Media inserted / removed.
Media on-line / off-line.
Media full.
Date / time or daylight saving start / end changed.
High process alarm active / inactive.
Low process alarm – active / inactive.
High latch alarm – active / inactive.
Low latch alarm – active / inactive.
Alarm acknowledged.
18 CI/AWT440–EN Rev. A