Table of Contents
Advertisement
1.5 Short operating instructions for SimulFAM
(1) Connect the device with the mains switch at the back of the device. The device
will then carry out an automatic check of all functions. If faultless, the automatic
check ends with the acoustic signal.
(2) Connect the accessories with the respective socket on the right side of the
device.
(3) In the display you see the window with the settings of the last treatment.
(4) Select SimulFAM
(5) Apply the electrodes to the patient (see chapter 5.3, Position of the Electrodes).
Select a channel with the channel buttons. The active channel shows up in the
color of the channel.
(6) Increase the current slowly with the Intensity regulator until the patient feels a
tingling sensation.
(7) In case of a frequency scan the current stimulation frequency is shown. The
frequency values increase and decrease every second.
(8) A special tone marks the end of the treatment time.
(9) The current to the patient will decrease automatically.
gbo Medizintechnik AG
®
X from the favourites' list.
®
X
7
Version 1.3
Hide quick links:
Advertisement
Table of Contents
