Deactivate Intensity Monitoring - gbo Medizintechnik HiToP 4 touch Instructions For Use Manual

14

3.3.1 Deactivate intensity monitoring

!!
Note!
Select the respective channel with the channel buttons.
1.
Press the button "Intensity monitoring".
2.
The blue bar which indicates Intensity monitoring is active will get grey.
3.
!!
Note!
 gbo Medizintechnik AG
 The intensity monitoring is automatically activated for all
channels after each restart of the unit! The function can be
manually deactivated with the button "Intensity monitoring"
after starting the unit.
 Only deactivate the intensity monitoring as an exception, e. g.
in case of the Big-Tast-Therapy!
 If the "Intensity monitoring" for a channel is deactivated, the
bar in the button "Intensity monitoring" will be grey.
 If the "Intensity monitoring" for a channel is deactivated, the
following symbol will be shown in the channel overview.
 The Intensity monitoring remains deactivated for a channel
until it is modified manually into "on" by pressing the button
"Intensity monitoring".
 Upon each restart of the device the Intensity monitoring is
automatically activated.
Version 1.3