Mount The Oven - GE PVM9179, PSA9120, PSA9240 Installation Instructions Manual

ADAPTING BLOWER FOR
C3
RECIRCULATION
Place the blower unit back into the opening.
5
WARNING:
can cause injury or death. Do not pull or stretch
not pinched.
6 Secure blower unit to oven with the 2 screws
removed in Step 2. Insert the screw in bottom right
screw hole on the back of the oven.
7 Replace blower plate with the screws removed in
Step 1.
Installation Instructions
(continued)
Blower Plate Screws
Back of Oven
Blower Motor
Screw

MOUNT THE OVEN

C4
CAUTION:
IMPORTANT: Do not grip or use handle during
installation.
WARNING:
cause injury or death: If installing unit with metal
cord hole with the power supply cord bushing.
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
NOTE: When mounting
the microwave oven,
thread power cord through
hole in bottom of top
cabinet. Keep it tight
throughout Steps 1–3. Do
not pinch cord or lift oven
by pulling cord.
2 Rotate front of oven up
against cabinet bottom.
21
1 Lift microwave oven,
tilt it forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting plate.