Mount The Oven - GE PVM9179, PSA9120, PSA9240 Installation Instructions Manual

B5

MOUNT THE OVEN

CAUTION:
IMPORTANT: Do not grip or use handle during
installation.
WARNING:
cause injury or death: If installing unit with metal
cord hole with the power supply cord bushing.
IMPORTANT: If filler blocks are not used, case damage
may occur from overtightening screws.
NOTE: When mounting
the microwave oven,
thread power cord through
hole in bottom of top
cabinet. Keep it tight
throughout Steps 1–3. Do
not pinch cord or lift oven
by pulling cord.
Rotate front of oven up
2
against cabinet bottom.
3
Insert a self-aligning screw through top-center
cabinet hole. Temporarily secure the oven by
turning the screw at least two full turns after
the threads have engaged. (It will be completely
tightened later.)
Installation Instructions
1 Lift microwave oven,
tilt it forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting plate.
Cabinet Front
Cabinet Bottom Shelf
Oven Top
4 Attach the oven to the top cabinet.
5 Insert 3 self-aligning screws
(
1 4
top cabinet holes. Turn two full
turns on each screw.
7 Tighten the outer two screws to the top of the
oven. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
8 Install grease filters. See the Owner's Manual
packed with the oven.
18
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
-28 x ) through outer
Tighten center
6
screw completely
This
distance
can NOT
exceed 2"
to ensure
proper
installation