Rotor Flow Indicator: Model: DKF Operating Instructions 4. Regulation Use Any use of the Rotor Flow Indicator, model: DKF, which exceeds the manufacturer’s specifications, may invalidate its warranty. Therefore, any resulting damage is not the responsibility of the manufacturer. The user assumes all risk for such usage.
If possible, after completing the mechanical installation, check the threaded connection between the device and the piping for leakage immediately. 6. Technical Information Maximum Temperature: 120 °C Maximumg Pressure: 6 bar page 4 DKF K01/1115...
2 Explosion Risk Area was done. When used properly, and being a piece of mechanical equipment, the rotor flow indicator Type DKF-x1****** does not have its own potential source of ignition; it is not assigned an ID in the sense of the ATEX Directive.
Need help?
Do you have a question about the DKF and is the answer not in the manual?
Questions and answers