Yamaha L2 Command Reference Manual page 90

90 | Command Reference | Maintenance and operation functions
If "neighbor" is specified, information for the device connected to the interface is shown.
The following items are shown.
For show lldp interface ifname
• Interface and its statistical information
Agent Mode
Enable (tx/rx)
Message fast transmit time
Message transmission interval
Reinitialisation delay
MED Enabled
Device Type
Total frames transmitted
Total entries aged
Total frames received
Total frames received in error
Total frames discarded
Total discarded TLVs
Total unrecognised TLVs
For show lldp interface ifname neighbor
• Basic management information
Interface Name
System Name
System Description
Port Description
System Capabilities
Interface Numbering
Interface Number
OID Number
Management Address
• Mandatory TLV information
CHASSIS ID TYPE
PORT ID TYPE
TTL (Time To Live)
• 8021 ORIGIN SPECIFIC TLV information
Port Vlan id
PP Vlan id
VLAN ID
VLAN Name
Remote Protocols Advertised
Bridge mode (fixed as nearest bridge)
Transmission mode/Reception mode (Y:enable, N:disable)
LLDP frame transmission interval for high speed transmission
period (seconds)
LLDP frame transmission interval (seconds)
Time from LLDP frame transmission stop until re-
initialization (seconds)
LLDP-MED TLV transmission enable/disable
Device type (fixed as NETWORK_CONNECTIVITY)
Number of LLDP frames transmitted
Number of devices not received for more than TTL seconds,
and deleted from management table
Number of LLDP frames received
Number of LLDP frame reception errors
Number of LLDP frames discarded
Number of TLV discarded
Number of TLVs that could not be recognized
Received interface name
System name
System description
Port description
System capabilities
Type of interface number
Number of interface
OID number
MAC address os IP addresss
CHASSIS ID TLV type and value
PORT ID TLV type and value
Time to maintain device information (seconds)
ID of port VLAN
ID of protocol VLAN
ID of port VLAN
Name of port VLAN
List of supported protocols