Troubleshooting Tips - Lowrance Active Imaging 3-IN-1 Installation Manual

7
22

Troubleshooting tips

Transducer data not
displayed
No depth
Data washed out /
same color
Left/right data
swapped on screen
No source is
displayed
Troubleshooting tips
Installation Manual
Troubleshooting tips
• Check unit software is compatible
• Check transducer cable is connected to
display unit or sonar module (and it is
connected to the display unit)
• Check sonar is enabled in display unit,
refer to display unit Operator manual
• Check transducer is submerged in the
water
Check range or turn on auto range
Turn down contrast; try different palettes
Toggle the Flip Left/Right feature
• Make sure all switches are powered
• Ensure the sonar is enabled in display
unit, refer to display unit Operator
manual
• Check transducer cable is connected to
display unit
| Active Imaging transducers