Table of Contents
Advertisement
Fuse Identification
Fuses are located within the engine bay on the port side.
1
2
3
4
5
6
7
WARNING.
Explosion risk. Only use fuses that
comply with SAE J1171 (ignition protection).
Overcurrent protection fuses/breakers are rated at 30 amps
and located adjacent to battery isolator.
Conductor Identification
This chart sets out the corresponding colour
to all abbreviations printed on cables on the
craft.
22
1
12 volt socket: 20 amp
2
Bilge pump: 7.5 amp
13
3
Bilge pump switch: 7.5 amp
4
Navigation light: 5 amp
5
Bilge blower: 7.5 amp
8
9 10
11
12
6
VHF: 5 amp
7
Chartplotter: 7.5 amp
8
CAN power: 5 amp
9
Deck lights: 5 amp
10 Underwater lights: 10 amp
11 Shower: 5 amp
12 Music system: 5 amp
13 Ignition power
Code
Colour
Code
BK
Black
VT
Green
GN
RD
PK
Pink
GY
LTGN
Light green
BE
BN
Brown
WE
OE
Orange
YW
Lifting the Sportjet
Instructions for the correct use of lifting strops are
contained in the strop bag; please read these
carefully.
CAUTION.
result if the following procedure is
not adopted.
Tilt helm down before attempting to
lift the Sportjet (460 and 520 only)
when using standard Williams-
supplied lifting strops. Lifting
strops are available as an
optional accessory. Ensure
fastenings are attached correctly
before lifting.
WARNING.
please refer to instructions supplied with the strops and adhere to the Safe Working Load
values as follows: All Sportjet models: 750 kg max
Reboarding the Sportjet
1 Ensure engine is off and kill cord is
Colour
removed.
Violet
2 Lift up retaining flap and pull out ladder
Red
from underside of transom.
3 Ensure ladder is fully extended.
Grey
4 Climb ladder to access the bathing
Blue
platform.
White
5 Ensure ladder is stowed with the retaining
flap folded down before moving off.
Yellow
Damage to the tender may
Risk of injury or death. When Williams lifting strops are used
23
Hide quick links:
Advertisement
Table of Contents
