Fluke DTX Compact OTDR User Manual page 29

A
Wavelength for the trace and the End setting selected in
Setup. If the test ran at two wavelengths, press
Trace to switch wavelengths. You can set the wavelengths
in Setup.
B
Horizontal and vertical zoom factors for the trace. In
BC
zoom mode, use to zoom horizontally and
AD
to zoom vertically.
C
Event PASS/FAIL status appears if the cursor is on an event.
To see details about the event, press
H
then press .
D
For dual-wavelength tests, press
wavelengths.
E
K
Press to change the arrow keys functions from
I
moving the cursor ( ) to zooming. The navigational cue
above the softkey labels describes the arrow keys' current
function.
L
Next
J
View Events,
L
to switch
F
J
Press to see the Event Table.
G
Event information appears if the cursor is on an event.
Otherwise, the distance to the cursor is shown.
H
Horizontal scale for the distance along the cabling under
test. Vertical scale for the OTDR backscatter
measurements in decibels.
I
E
Cursor. See . In cursor mode, use
cursor left or right. Use
cursor to next or previous event.
J
To use the measurement marker and cursor, press
to set the marker; then use
K
The distance (m or ft) and the power loss (dB) between
the cursor and the measurement marker.
Using the OTDR
BC
to move the
AD
to move the
H
R SQT
to move the cursor.
23