Fluke 177 Series Instructions Manual
Fluke 177 Series Instructions Manual

Fluke 177 Series Instructions Manual

Lte module
Hide thumbs Also See for 177 Series:

Advertisement

177x
LTE Module
Instructions
Introduction
The 177X LTE module provides global LTE (4G)
communications and allows connections to Fluke 177X
products located remotely. The module requires a SIM card
and contract with a service provider that has coverage where
the instrument and module are located.
With this module you can wirelessly communicate from a
computer to the instrument. Communication can be through
a VNC (Virtual Network Connection) or through the Fluke
Energy Analyze Plus application package. With this remote
connection you do not have to frequently visit the site
location to observe how a site survey is progressing. All the
measured and logged data is available through the remote
connection.
Contact Fluke
Fluke Corporation operates worldwide. For local contact
information, go to our website: www.fluke.com.
To register your product, or to view, print, or download the
latest manual or manual supplement, go to our website.
+1-425-446-5500
fluke-info@fluke.com
PN 5280674 (English)
5/2023
©2023 Fluke Corporation. All rights reserved. Specifications are
subject to change without notice. All Product names are
trademarks of their respective companies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 177 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Fluke 177 Series

  • Page 1 With this module you can wirelessly communicate from a computer to the instrument. Communication can be through a VNC (Virtual Network Connection) or through the Fluke Energy Analyze Plus application package. With this remote connection you do not have to frequently visit the site location to observe how a site survey is progressing.
  • Page 2: Safety Information

    Safety Information A Warning identifies hazardous conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test. Warning To prevent possible electrical shock, fire, or personal injury: Read all safety information before you use the ...
  • Page 3: Module Installation

    Instructions Module Installation Antenna Attachment External Antenna with Cable Warning To prevent possible electrical shock, fire, or personal injury, use Product approved measurement category (CAT) antenna cables when the Product is installed in environment where wires or exposed metal parts provide access to hazardous live voltage, such as, in cabinets.
  • Page 4: Specifications

    Note The external antenna is not sold by Fluke. The antenna cable connects to the antenna with a SMA connector that has an outside thread and a center receptacle (SMA female/jack). Former FCC regulations required that WiFi equipment must use reverse polarity connectors.
  • Page 5: Simplified Eu Declaration Of Conformity

    > Radio Certifications on the 177x Product SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Fluke declares that the radio equipment contained in this Product is in compliance with Directive 2014/53/EU. The full text of the EU declaration is available at the following internet address: www.fluke.com/RED...
  • Page 6: Limited Warranty

    LIMITED WARRANTY This Fluke product will be free from defects in material and workmanship for 2 years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.

Table of Contents