Using The Cradle; Software Requirements - Fluke DTX Compact OTDR User Manual

Optical time domain reflectometry modules
Table of Contents

Advertisement

DTX Compact OTDR Modules
Users Manual

Using the Cradle

Figure 2 shows how to use the cradle to stand the tester up
on a flat surface when a DTX Compact OTDR module is
attached.
Figure 2. Using the Cradle
6

Software Requirements

The following software supports the DTX Compact OTDR
module. Software upgrades are available on the Fluke
Networks website.
DTX software: version 2.0 or higher.
LinkWare
See the DTX CableAnalyzer Users Manual for instructions on
updating the tester's software.
Update the software with the OTDR module
attached to the tester.
If your tester's software version is lower than 2.0,
you will need to do the software update procedure
twice.
amd165.eps
software: version 3.0 or higher.
Notes

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DTX Compact OTDR and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents