Table Of Contents - Flowserve Interseal SLC Series Installation Instructions Manual

Table of Contents

General Seal Installation Instructions2
Typical Slc Cartridge2
Product View And Parts Identification2
Equipment Preparation For Mechanical Seal Installation3
Equipment Checks3
Check Axial Shaft Travel3
Check Radial Shaft Deflection4
Wet (Impeller Side) Cartridge Installation4
Center Adapter Plate To Shaft4
Adapter Plate Mounting Surface Perpendicular To Shaft5
Install Wet Side Cartridge5
Draw Cartridge Into Adapter Using Attachment Bolts6
Torque Value Chart N-M (Ft-Lb)6
Remove Centering/Setting Plates Prior To Operation7
Dry (Bearing Side) Cartridge Installation7
Install Dry Side Cartridge8
Bolt Cartridge To Adapter Plate Face9
Seals Fitted With Quench And Lip Seal Option10
Correct Flange Orientation For Quench Port Connections10
Normal Operation Procedures11
Equipment Start Up11
Equipment Shut Down11