Setting Equaliser; Network Setup - TechniSat DIGITRADIO 110 IR Instruction Manual

4. When the display shows 'Alarm Saved', the alarm setting is successful.
5. To temporarily switch off alarm, press SNOOZE button to activate Snooze function when the alarm is
sounding. Press SNOOZE button repeatedly can set Snooze time of 5, 10, 15 or 30 minutes in turn. The
set snooze time will show on the display.
6. To turn off alarm, press
7. To cancel Alarm, refer to steps 1-3 to enable alarm 'Off'.

11.3 Setting Equaliser

This feature enables you to choose a sound equalization profile. Each of the equalization setting will change the
tone of the sound from your radio when selected.
1. Press MENU button > Main menu > System settings > Equaliser, and then press OK button to confirm.
2. Press or button to select through Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News, My EQ or My
EQ profile setup, and then press OK button to confirm.
3. To set up My EQ, select 'My EQ profile setup', and then press OK button to confirm. Press
to select Bass or Treble, and then press OK button to confirm. Press
of Bass or Treble, and then press OK button to confirm. Press
Press or button to select 'YES' and then press OK button to save changes.

11.4 Network Setup

Users encountering networking issue may find these options useful for diagnosing and fixing network problems.
1. Press MENU button > Main menu > System settings > Network, press OK button to confirm.
2. Press or button to select your preferred network setting option:
Network wizard:
PBC Wlan setup:
36
button when the alarm is sounding.
Scan for available networks
Set up a WPS encrypted network (only support the
router uses WPS 2.0)
or will show on the display.
or button to change the value
button, display will show 'Save changes'.
or button