LAUNCH TECH X-431 V+ User Manual page 4

LAUNCH
Safety Precautions
Before using X-431 V+, please read the following safety information carefully.
Never collide, throw, or punch X-431 V+, and avoid falling, extruding and
blending it.
Do not use X-431 V+ in exceptionally cold or hot, dusty, damp or dry
environments.
In places where X-431 V+ is forbidden or using X-431 V+ may cause
interference or generate a potential risk, please turn off it.
To ensure a safe driving, please do not use X-431 V+ while driving.
Turn off X-431 V+ before boarding any airplane.
Do not dismantle X-431 V+ by yourself. If there is any inquiry, please
contact the dealer.
Never place X-431 V+ into apparatus with strong electromagnetic field.
Keep X-431 V+ far away from magnetic devices because its radiations may
erase the data stored on the devices.
Store X-431 V+ out of reach of children and do not allow children to use it
unsupervised.
Please use the included battery and charger. Otherwise, explosion may
happen.
Do not disconnect power abruptly when X-431 V+ is being formatted or in
process of uploading or downloading. Or else it may result in program error.
Precautions on Using X-431 V+
The ignition switch should be OFF while plugging or unplugging the
DBScar diagnostic connector.
When DBScar connector is not used, remember to place it into the
diagnostic connector housing located at the back of the protection sleeve
to avoid loss.
If your vehicle keeps unattended for a week or a long period, it is
suggested to unplug the connector from vehicle's DLC to save battery
power.
While diagnosing a vehicle, you are not advised to use phone or
messaging, because it may cause a data communication interruption. If it
happens, it is abnormal and just try to re-do it.
Precautions on Operating Vehicle's ECU
Do not disconnect the vehicle inner consumer when the ignition switch is
X-431 V+ User's Manual — Safety Precautions
ii