Preparations; Charging X-431 V; On Using Your Battery; Power On / Power Off X-431 V - LAUNCH TECH X-431 V+ User Manual

LAUNCH
USB data cable
Non-16pin connector

2.1 Charging X-431 V+

1. Insert the included USB cable into the charger.
2. Plug the charger into AC outlet.
3. Connect the other end of USB cable to X-431 V+. If
screen, it indicates it is being charged.
4. If the logo changes into
Disconnect the charger from the AC outlet.
5. Unplug the USB cable on the charger from X-431 V+.

2.2 On using your battery

If the battery keeps unused for a long time or battery is completely
discharged, it is normal in case it can not be turned on while being charged.
Please charge it for a period and then turn it on.
To prolong the service life of the battery, avoid charging too frequently.
The charging time of battery varies with temperature condition and battery
consumption status.
While X-431 V+ has low battery, a beep will sound. If it is very low, X-431
V+ will be switched off automatically.

2.3 Power on / power off X-431 V+

2.3.1 Power on

Press the POWER key until it is slightly vibrated to turn on X-431 V+.
Note: if it is the first time you use your X-431 V+ or X-431 V+ keeps idle for a
long time, X-431 V+ could fail to be turned on. It results from low battery. In
this case, please charge your X-431 V+ for a while and try to turn it on.

2.3.2 Power off

1. Press the POWER key, an option menu will pop up on the screen.
2. Tap "Power off" to turn off X-431 V+.
X-431 V+ User's Manual — Knowledge of X-431 V+

2 Preparations

, it indicates that the battery is fully charged.
7
appears on the