Kodak DryView 6800 Diagnostics Manual page 154

DIAGNOSTICS
30JUL07
2 Do the following:
8F2919
Page
154 of 326
For obstructions
For film jam
FILM CARTRIDGE
CONNECTORS and CABLES Seat all CONNECTORS.
BLINDMATE CONNECTOR
ROLLBACK HOME SENSOR
- use the SERVICE TOOL
ROLLBACK OPEN SENSOR
- use the SERVICE TOOL
SENSOR FLAG
MOTOR - use the SERVICE
TOOL
ROLLER GEAR
LATCH mechanism
TENSION SPRINGS
CHAIN for obstructions or
damage
FSB
Check:
Remove obstructions.
Remove films.
Install a new FILM CARTRIDGE.
Adjust THE BLINDMATE. See the ADJUSTMENTS AND
REPLACEMENTS,
Install a new SENSOR. See the ADJUSTMENTS AND
REPLACEMENTS,
AY.
Install a new SENSOR. See the ADJUSTMENTS AND
REPLACEMENTS,
AY.
Install a new FLAG. See the ADJUSTMENTS AND
REPLACEMENTS,
Install a new MOTOR. See the ADJUSTMENTS AND
REPLACEMENTS,
Install a new GEAR. See the ILLUSTRATED PARTS
LIST,
Install a new LATCH. See the ILLUSTRATED PARTS
LIST,
Install a new SPRING. See the ILLUSTRATED PARTS
LIST,
1.
2.
Install a new FSB. See the ADJUSTMENTS AND
REPLACEMENTS,
PICKUP
If an existing problem:
BLINDMATE
SENSOR, HOME (S6) - ROLLBACK
SENSOR, OPEN (S7) - ROLLBACK
FLAG - ROLLBACK
MOTOR AY (M6) - ROLLBACK
ROLLBACK AY - Overview.
ROLLBACK AY - Overview.
ROLLBACK AY - Overview.
Remove obstruction.
Install a new CHAIN. See the ADJUSTMENTS AND
REPLACEMENTS, CHAIN - ROLLBACK
FILM SUPPLY BOARD (FSB) AY -
AY.
Status Messages and Error Codes
BRACKET.
AY.
AY.
AY.