Kodak DryView 6800 Diagnostics Manual page 137
Laser imager
Hide thumbs
Also See for DryView 6800:
- User manual (64 pages) ,
- Quick start manual (1 page) ,
- Specifications (6 pages)
Table of Contents
Advertisement
DIAGNOSTICS
30JUL07
FE Action
8F2919
Page
Do the actions below in sequence. If an action provides a resolution, do not continue with the
137 of 326
other actions.
1
De-energize then energize the LASER IMAGER.
2
Do the following:
FILM CARTRIDGE
For a film jam
For an obstruction
CONNECTORS and CABLES Seat all CONNECTORS.
ROLLERS
FILM AT FEED SENSOR -
use the SERVICE TOOL
FEED ROLLER OPEN/
CLOSE MOTOR - use the
SERVICE TOOL
ROLLER DRIVE MOTOR
PICKUP DRIVE MOTOR
3
Install a new PICKUP AY. See the ADJUSTMENTS AND REPLACEMENTS,
Check:
Install a new FILM CARTRIDGE.
Remove films.
Remove the obstruction.
Install new ROLLERS.
Install a new SENSOR. See the ADJUSTMENTS AND
REPLACEMENTS,
PICKUP
Install a new MOTOR. See the ADJUSTMENTS AND
REPLACEMENTS,
CLOSE (M1) - PICKUP
Install a new MOTOR. See the ADJUSTMENTS AND
REPLACEMENTS,
(M2) - PICKUP
Install a new MOTOR. See the ADJUSTMENTS AND
REPLACEMENTS,
If an existing problem:
SENSOR, FILM AT FEED (S5) -
AY.
MOTOR, FEED ROLLER OPEN/
AY.
MOTOR, FEED ROLLER DRIVE
AY.
MOTOR, DRIVE (M3) - PICKUP
Status Messages and Error Codes
AY.
PICKUP
AY.
Advertisement
Table of Contents
