Blackmagicdesign Pocket Cinema Camera 4K User's Installation And Operation Manual page 56

Channel 1/2 Level
The level meters help you set the correct audio level.
Channel 1/2 Gain
Use these sliders to adjust the recording levels of your chosen channel 1 and 2 sources.
Audio Settings 2
The second page of your Blackmagic Pocket Cinema Camera 4K's 'Audio' tab contains the
following settings
Headphones Volume
This slider adjusts the output levels for headphones attached to Blackmagic Pocket Cinema
Camera 4K's 3.5mm headphone jack. Move the audio slider left or right to adjust levels.
Speaker Volume
This slider adjusts the output levels for your Blackmagic Pocket Cinema Camera 4K's built in
speaker. Move the audio slider left or right to adjust levels.
XLR Phantom Power
Your Blackmagic Pocket Cinema Camera 4K's XLR input can provide 48V phantom power so
you can use microphones that aren't self powered. When your camera is set to 'XLR' audio
input, simply tap the 'phantom power' switch icon to enable phantom power.
NOTE It is standard practice to plug in your XLR cable before switching phantom
power on. It is also important to switch phantom power to 'off' when you no longer
have a phantom powered microphone connected. Connecting equipment that doesn't
require phantom power when still in phantom power mode can damage your
equipment, as the camera outputs a charge when in this mode. Phantom power can
also take quite a while to discharge after switching phantom power off on Blackmagic
Pocket Cinema Camera 4K.
Please be aware that you should wait a few minutes when switching off phantom
power before plugging in any other microphones or XLR audio equipment.
Settings 56