4. Ray-On+ Control software
The Ray-On+ control software is available for Windows and OSX operating
systems. Installers can be found on the supplied USB key or on Active Audio's
website by following this link: http://www.activeaudio.fr/downloads.
4.1. System requirements
Processor
Memory
Network
Operating System Windows 7 SP1 or newer Mac OS X 10.7.5 or newer
4.2. Installation on Windows
Start the installer package by double-clicking on it, then follow the instructions.
Figure 6 : Ray-On+ Software installation on Windows
ver. 2018/07/26
1Ghz or better
512Mbyte of RAM
Standard wired Ethernet network interface (100Mbps or Gigabit).
Wireless LAN (Wi-Fi) Ethernet interfaces are not supported
User Manual - Ray-On+ series
8/24