Place the 2 brackets Column height on the wall + 5mm using 8mm diameter screws The StepArray range includes 6 models of column speakers, from 1m to 4m high. Ensure Mount the column verticality using the supplied nut and screw...
MPA8200 amplifier to the corresponding channel of the column and provide a common ground, as illustrated by figure 4. A NUT processor can be connected to one or several StepArray columns via amplifiers (see figure 2). When a NUT is used with several amplifiers (to feed several columns with the same signal), the inputs are simply daisy chained (see figure 2b).
Correct the column mo- The NUT control software is used to tune the filtering and directivity parameters the StepArray block in del in the StepArray of StepArray columns, it is available as free download on Active Audio’s web control doesn’t block.
Technical manual - StepArray series Technical manual - StepArray series 7. Hardware specifications 7.2. MPA8200 amplifier 7.1. NUT processor Audio data Operating modes 8 channels independent 4 channels independent bridged Audio data Power 8 x 200W under 8Ω Inputs 8 symetrical analog inputs, Euroblock 8 x 300W under 4Ω...
Technical manual - StepArray series Technical manual - StepArray series 8. Acoustical data 8.2. SA100P : acoustical data All data presented below is obtained with columns in their nominal position and 10dB using nominal DSP filtering param- eters (flat EQ, etc).
Technical manual - StepArray series Technical manual - StepArray series 9. Déclaration de conformité 8.7. SA250S : acoustical data 10dB SA250S -5dB h=3,85m -10dB -15dB -20dB SA250S vertical directivity: sound level for the voice octaves ACTIVE AUDIO SAS, (500Hz,1kHz,2kHz) in the vertical median plane.
Page 12
Active Audio 8 Rue Johannes Gutenberg 44340 Bouguenais - France Phone: +33 (0)2 404 666 64 Contact...