Table of Contents
Advertisement
4.4. Using the Ray-On+ Control software
The Ray-On+ control software gives access to the following functions:
• input selection: Dante, Analog or Dante/Analog fallback
• general output volume
• optimized equalization for speech or music
The Ray-On+ control software does not include
Dante routing functionality. When using Dante to
transmit audio, you will need the Dante Controller
software to assign Dante channels to Ray-On+ co-
lumns.
Dante Controller is available free of charge from the
Audinate website: https://www.audinate.com/pro-
ducts/software/dante-controller.
When launching the Ray-On+ control software, the first screen lists all the
Ray-On+ columns it can find on the network. The first connection to a Ray-
On+ column can take up to 1 minute: this is the time needed to initiate the
communication.
4.4.1 Main page
Figure 8 : Ray-On+ control software: main screen
ver. 2018/07/26
User Manual - Ray-On+ series
10/24
Advertisement
Table of Contents
