Active Audio R80+ User Manual page 11

1. Network interface: Select the network corresponding to your Dante network.
If you have several network interfaces, the software will select your default
network interface.
2. Snapshot: Export a snapshot of your installation as a csv file by clicking on
this button. The csv file contains the settings of all the devices detected on the
network.
3. Device Name: The device name displayed corresponds to the device name
defined in Dante Controller: Device view -> Device config -> Rename Device.
4. Model: The model icon helps you to remember which model of Ray-On+
you are setting up. The Ray-On+ model can be changed in the Device Settings
window.
5. Status: Model displays the current model selected. EQ specifies which kind of
equalization you are using.
6. Copy: Copy all the device parameters by clicking on this icon.
7. Paste: Paste all parameters from another device.
8. Tone: Enable/Disable a beep through the Dante network to help you localize
the device in your installation.
9. Mute: Enable/Disable the general output of the device.
10. Context menu: The context menu actions should be done only by an admi-
nistrator. Right-click opens the context menu.
• Upgrade to the latest software: This action upgrades the device to the
latest software version. All parameters will be erased.
• Upgrade to the latest firmware: This action upgrades the device to the
latest firmware version. All parameters will be erased.
• Export device configuration: Allows you to export the device parameters
as a binary file (.ro). This file could be loaded into another device.
• Load device configuration from file: Allows you to import parameters
previously exported from a device and load them into the current device.
ver. 2018/07/26
User Manual - Ray-On+ series
11/24