Ge nera l
BNC C onne cto rs (Option)
Connecting
General
the Monitor
Installing the
Monitor Driver
Base Installat ion
1. Connect the power cord for your monitor to the power port on the back of the monitor.
2. Connect the signal cable to the video port on your computer, video board, video card, or
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
4. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
BNC Connec tors (Option)
1. Connect the power cord for your monitor to the power port on the back of the monitor.
2. Connect the end of the signal cable to your computer's video port(video board, vide o card or
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
Plug the power cord for the monitor into a nearby outlet.
graphics card.
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
Plug the power cord for the monitor into a nearby outlet.
graphics card).
SyncMaster 797MB/997MB
SyncMaster 997MB