Samsung SyncMaster 797MB Owner's Manual page 12

Ge nera l
BNC C onne cto rs (Option)
General
Unpacking
Front
Rear
Bottom
1. Power port
2. Signal Cable
BNC Connec tors (Option)
1. Power port
2. Signal port
3. BNC Connectors
(Option)
Note: See
(The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the video port on your computer, video board,
video card, or graphics card.
(The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the 15-pin D-sub connector on the back of
your monitor.
Connect the signal cable to the BNC signal port on the back of your
monitor.
Connecting the Monitor
SyncMaster 797MB/997MB
SyncMaster 997MB
for further information regarding cable connections.