Download
Share
Print this page
Samsung SyncMaster 591S, 793S, 793DF, 795DF, 797DF, 997DF, 793MB, 795MB Owner's Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster 591s
  6. Owner's manual

Samsung SyncMaster 591S, 793S, 793DF, 795DF, 797DF, 997DF, 793MB, 795MB Owner's Manual

Samsung monitor owner's manual
Hide thumbs Also See for SyncMaster 591S, 793S, 793DF, 795DF, 797DF, 997DF, 793MB, 795MB:

Advertisement

Quick Links

Download this manual See also: User Manual, Manual
SyncMaster 591S/793S/793DF/795DF/797DF/997DF/793MB/795MB

Advertisement

loading

Related Manuals for Samsung SyncMaster 591S, 793S, 793DF, 795DF, 797DF, 997DF, 793MB, 795MB

Summary of Contents for Samsung SyncMaster 591S, 793S, 793DF, 795DF, 797DF, 997DF, 793MB, 795MB

  • Page 1 SyncMaster 591S/793S/793DF/795DF/797DF/997DF/793MB/795MB...
  • Page 2 INDEX Main Page Safety Instructions Notational Power nstallation Cleaning Other Introduction Unpacking Front Rear Bottom Setup Connecting Your Monitor Installing the Monitor Driver Automatic Manual Base Installation Troubleshooting Check List Q & A Self-Test Feature Check Specifications General Specifications Preset Timing Modes PowerSaver Information Service...
  • Page 3 Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Grounding to prevent an electric shock...
  • Page 4 Power When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. If the size of your monitor is small, or if the same image is present for long periods of time, you may see afterimages due to damage to the fluorescent substance on the inside of the CDT.

  • Page 5: Installation

    Installation Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Put your monitor in a location with low humidity and a minimum of dust. An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it.
  • Page 6 You can prevent the coated CDT from being damaged or the monitor cabinet from being dissolved, cracked or discolored. You can buy a recommended detergent at any Samsung Service Center. A dirty connector can cause an electric shock or fire.
  • Page 7 Other Do not remove cover(or back). No user serviceable parts inside. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and Do not place any heavy objects on the monitor. For each hour of looking at the monitor, you should let your eyes rest for 5 minutes.
  • Page 8 Other Keep the monitor away from any magnetic substances. This may cause discoloring or distortion of the image.
  • Page 9 Unpacking Monitor and Stand (Some models include a stand attached. ) Please make sure the following items are included with your monitor. If any items are missing, contact your For Multimedia model Multimedia Speaker Stand Power Cord Stand Quick Setup Guide dealer.
  • Page 10 Front Opens the OSD menu. Also used to exit the OSD menu or return to the 1. Menu button previous menu. 2. Adjust buttons These buttons allow you to highlight and adjust items in the menu. Used to select the OSD menu. 3.
  • Page 11 Rear General (The configuration at the back of the monitor may vary from product to product.) Connect the power cord for your monitor to the power port on the back of 1. Power port the monitor. Connect the signal cable to the video port on your computer, video board, 2.
  • Page 12 Bottom 1. Signal Cable 2. Power port 3. Tilt/Swivel Base Connect the signal cable to the video port on your computer, video board, video card, or graphics card. Connect the power cord for your monitor to the power port on the back of the monitor.

  • Page 13: Connecting Your Monitor

    Connecting Your Monitor General 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the video port on your computer, video board, video card, or graphics card.
  • Page 14 Connecting Your Monitor pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter. 4. When you use a BNC connector. Connect the signal cable to the BNC signal port on the back of your monitor/computer. 5. Turn on your computer and monitor. If your monitor displays an image, installation is complete. Opstilling-For multimedia-model 1.
  • Page 15 Connecting Your Monitor Fodstykke for Multimedia højttaler 1. Mic by-pass jack For transmission af din stemme, tilslut et lydkabel fra mic by-pass jack til mic in jack på lydkortets slot i din computer. 2. Stereo input jack Tilslut et lydkabel fra input kilden (lydkort, computer, CD-ROM drev).

  • Page 16: Installing The Monitor Driver

    5. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. * This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/. 6. Monitor driver installation is completed.
  • Page 17 2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" Icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. http://www.samsung-monitor.com/ (WorldWide) http://www.samsungusa.com/monitor/ http://www.sec.co.kr/monitor/...
  • Page 18 Installing the Monitor Driver 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7.
  • Page 19 Installing the Monitor Driver This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/. 9. Click the " Close " button then click " OK " button continually.
  • Page 20 Installing the Monitor Driver How to install 1. Click " Start " , " Setting " , " Control Panel ". 2. Double click the " Display " Icon. 3. Choose the " Settings " tab and then click " Advanced.. ". 4.

  • Page 21: Base Installation

    Base Installation With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle. Note: The base is detachable. Attaching the Base 1. Place the monitor upside-down on a flat work surface. 2. Align the tabs on the base with the corresponding slots on the bottom of the monitor. 3.

  • Page 22: Check List

    Check List Note Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer. Symptom No images on the screen.
  • Page 23 Check List Symptom The image on the screen is shaking. The screen shows strange colors or just black and white. The screen suddenly has become unbalanced. Check List Check the monitor configuration to see if it is in Interlace Mode. (Interlace Mode: Vertical frequency 43Hz, 87Hz(i), etc) Are there any magnetic...
  • Page 24 Check List Symptom The screen is out of focus or OSD cannot be adjusted. The screen is partially distorted. LED is blinking but no images on the screen. There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.
  • Page 25 Q & A Question How can I change the frequency? How can I adjust the resolution? How can I set the Power Saving function? The monitor makes a sound when it is turned on. How can I clean the outer case/Picture tube? Answer Frequency can be changed by reconfiguring the video...

  • Page 26: Self-Test Feature Check

    Self-Test Feature Check SyncMaster 591S/793S/793DF/795DF/797DF/793MB/795MB Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3.
  • Page 27 Self-Test Feature Check A monitor recreates visual signals received from the PC. Therefore, if there is trouble with the PC or the video card, this can cause the monitor to become blank, have poor coloring, noise, Sync. Out of Range, etc. In this case, first check the source of the problem, and then contact a service center or your dealer.
  • Page 28 General Model Name Picture Tube General Type PowerSaver Preset Timing Deflection angle Modes Dot Pitch Screen type Maximum Resolution 1600 x 1200@76Hz Active Display Horizontal Vertical Synchronization Horizontal Vertical Input Signal Definition Video Signal Sync Signal Display Color Unlimited Maximum Pixel Clock 250 MHz Power Supply 90 ~ 264VAC rms, 60/50 Hz ±...
  • Page 29 ® This monitor is EPA E NERGY used with a computer equipped with VESA DPMS functionality. ® As an E Partner, SAMSUNG has determined that this product meets NERGY ® the E guidelines for energy efficiency. NERGY Power-off Mode EPA/ENERGY...
  • Page 30 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 31 General Model Name Picture Tube General Type PowerSaver Preset Timing Deflection angle Modes Dot Pitch Screen type Maximum Resolution 1600 x 1200 (NI) Active Display Horizontal Vertical Synchronization Horizontal Vertical Input Signal Definition Video Signal Sync Signal Display Color Unlimited Maximum Pixel Clock 185 MHz Power Supply...
  • Page 32 ® This monitor is EPA E NERGY used with a computer equipped with VESA DPMS functionality. ® As an E Partner, SAMSUNG has determined that this product meets NERGY ® the E guidelines for energy efficiency. NERGY Power-off Mode EPA/ENERGY...
  • Page 33 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 34 General Model Name Picture Tube General Type PowerSaver Preset Timing Deflection angle Modes Dot Pitch Screen type Maximum Resolution 1280 x 1024 (NI) Active Display Horizontal Vertical Synchronization Horizontal Vertical Input Signal Definition Video Signal Sync Signal Display Color Unlimited Maximum Pixel Clock 110 MHz Power Supply...
  • Page 35 ® This monitor is EPA E NERGY used with a computer equipped with VESA DPMS functionality. ® As an E Partner, SAMSUNG has determined that this product meets NERGY ® the E guidelines for energy efficiency. NERGY Power-off Mode EPA/ENERGY...
  • Page 36 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 37 General Model Name Picture Tube General Type PowerSaver Preset Timing Deflection angle Modes Dot Pitch Screen type Maximum Resolution 1280 x 1024 (NI) Active Display Horizontal Vertical Synchronization Horizontal Vertical Input Signal Definition Video Signal Sync Signal Display Color Unlimited Maximum Pixel Clock 110 MHz Power Supply...
  • Page 38 ® This monitor is EPA E NERGY used with a computer equipped with VESA DPMS functionality. ® As an E Partner, SAMSUNG has determined that this product meets NERGY ® the E guidelines for energy efficiency. NERGY Power-off Mode EPA/ENERGY...
  • Page 39 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 40 General Model Name Picture Tube General Type PowerSaver Preset Timing Deflection angle Modes Dot Pitch Screen type Maximum Resolution 1024 x 768(NI) Active Display Horizontal Vertical Synchronization Horizontal Vertical Input Signal Definition Video Signal Sync Signal Display Color Unlimited Maximum Pixel Clock 65 MHz Power Supply 90 ~ 264VAC rms, 60/50 Hz ±...
  • Page 41 ® This monitor is EPA E NERGY used with a computer equipped with VESA DPMS functionality. ® As an E Partner, SAMSUNG has determined that this product meets NERGY ® the E guidelines for energy efficiency. NERGY Power-off Mode EPA/ENERGY...
  • Page 42 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 43 General Model Name Picture Tube General Type PowerSaver Preset Timing Deflection angle Modes Dot Pitch Screen type Maximum Resolution 1600 X 1200@ 76Hz Active Display Horizontal Vertical Synchronization Horizontal Vertical Input Signal Definition Video Signal Sync Signal Display Color Unlimited Maximum Pixel Clock 250 MHz Power Supply...
  • Page 44 ® This monitor is EPA E NERGY used with a computer equipped with VESA DPMS functionality. ® As an E Partner, SAMSUNG has determined that this product meets NERGY ® the E guidelines for energy efficiency. NERGY Power-off Mode EPA/ENERGY...
  • Page 45 If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
  • Page 46 Tel. 214 148 114/100 Fax. 214 148 133/128 Free Line 800 220 120 http://www.samsung.pt/ SOUTH AFRICA : Samsung Electronics,5 Libertas Road, Somerset Office Park, Bryanston Ext 16. Po Box 70006, Bryanston,2021, South Afric Tel : 0027-11-549-1621 Fax : 0027-11-549-1629 http://www.samsung.co.za/...
  • Page 47 Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) http://samsungusa.com IMPORTADO POR: SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Saturno NO.44, Col. Nueva Industrial Vallejo Gustavo A.Madero C.P.07700, Mexico D.F. Mexico TEL. 52-55-5747-5100 EXPORTADO POR: Samsung Electronics CO.,LTD.
  • Page 48 Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user.

  • Page 49: Natural Color

    For more information, refer to Help (F1) in the software program. How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program installation will be executed. Click Natural Color on the initial screen to install the Natural Color software.
  • Page 50 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This manual is also suitable for:

Syncmaster 793dfSyncmaster 793mb997df-ivory56v59eSyncmaster 793s ... Show all