Advertisement
Quick Links
L-SYSTEM FASCIAS
INSTALLATION INSTRUCTIONS
L-SYSTEM FASCIAS
INSTALLATION INSTRUCTIONS
Thank you for purchasing your new L-System Fascias. They
have been custom-made from the highest quality materials
to the dimensions you specified. With the proper installation
and care, it will provide you with many years of beauty and
trouble-free use.
Please read all instructions before you start so you will be
familiar with the overall process.
Make sure you measure your window to ensure the fascia
and shade will fit properly before beginning.
Getting Started
Remove the fascia and shade from the packaging. Keep the
packaging until you have successfully installed the fascia and
the shade.
TOOLS REQUIRED
• Pencil
• Power Drill with the following bits:
• Awl
- ¹⁄₁₆" Drill Bit
• Tape Measure
- ¹⁄₄" Hex Driver
• Level
- Standard Screwdriver
• Ladder or Stepstool
- Small Magnetic Tip Phillips Screwdriver
- Masonry Drill Bit (if drilling into
concrete or brick)
FASTENER NOTES
For outside mount, it is best to attach the bracket to wood
studs. If this is not possible, you will need to purchase special
fasteners (see illustration below for examples).
Molly Bolt
Hollow Wall Anchor
Here are some HELPFUL TIPS:
• If you are using a special fastener, make sure it is
designed to support the weight of the fascia and shade.
Follow the fastener manufacturer's instructions carefully.
• When drilling into drywall or plaster, use a fastener
designed for hollow wall applications (see illustration).
• When drilling into concrete, stone, brick, or tile, use
appropriate plugs, anchors, or screws (not included).
• When drilling into metal, the included screws are sufficient.
Pre-drill ¹⁄₈" holes.
Anchor
Advertisement
Related Manuals for Fabritec designs L-SYSTEM FASCIAS
Summary of Contents for Fabritec designs L-SYSTEM FASCIAS
-
Page 1: Getting Started
L-SYSTEM FASCIAS INSTALLATION INSTRUCTIONS Thank you for purchasing your new L-System Fascias. They have been custom-made from the highest quality materials to the dimensions you specified. With the proper installation and care, it will provide you with many years of beauty and trouble-free use. - Page 2 BEFORE YOU BEGIN, VERIFY THAT YOU HAVE ALL THE NECESSARY STEP 2 - INSTALLING THE SHADE. PARTS AND PIECES: a. Begin by installing the idler end first. • PACKAGE - Contains two universal end brackets (one will There is a transit clip on the idler end of the shade. have the chain guard already installed), one separate The transit clip should be positioned either straight up and chain guard with installation screws, two end caps, two...
- Page 3 STEP 2 - INSTALLING THE SHADE (continued). STEP 4 - SET THE STOP POSITION. c. Slip the clutch end into the bracket. Lower the shade to the desired long point. While keeping the idler end in position, lift the shade up Then pinch the bead chain at this point and place one of into the bracket and align the clutch end pin into the the bead chain stops here.
- Page 4 P-clip installed STEP 6 - SNAP ON THE FASCIA. Catch the top end of the fascia on the top of the bracket and simply snap into place. Caring for your L-System Fascias & Roller Top end of shades the fascia Your fascias and roller shades will provide you with years of beauty and pleasure with minimal care and cleaning.
-
Page 5: Front Top View
L-SYSTEM FASCIA DETAILED DIAGRAM End Cap Idler Bracket Clutch Clutch Bracket Shade Round Hem Bar, optional L-System Fascia Panel (covers front and part of bottom) EST. 1973 End Cap Chain FRONT TOP VIEW (Room side) Holddown IMPORTANT! 1. Please read installation instructions first (included with hardware). 2.
Need help?
Do you have a question about the L-SYSTEM FASCIAS and is the answer not in the manual?
Questions and answers