Connecting An Av Component In A Separate Room (Multi-Zone Connection); Connecting A Tv (Zone 2) - Pioneer VSX-LX503 Instruction Manual

Connecting an AV Component in a Separate Room (Multi-zone Connection)

Connecting a TV (ZONE 2)

a
a HDMI cable
Contents Connections
≫
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). The TV in the separate room can play only the video of devices
connected to the HDMI IN1 to IN3 jacks of this unit.
• Audio from an externally connected AV component can be output to ZONE 2
only when the audio is analog or 2ch PCM signal. When the AV component
is connected to this unit with an HDMI cable, digital coaxial cable or digital
optical cable, change the audio output of the AV component to the PCM
output.
• When video and audio via HDMI input are output to ZONE 2, set "Input/Output
Assign" - "TV Out / OSD" - "Zone 2 HDMI" (
Setup menu.
TV
66
Playback
≫
p118) to "Use" on the System
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫