Manual Mcacc - Pioneer VSX-LX503 Instruction Manual

Manual MCACC

„ EQ Adjust
If you perform Full Auto MCACC then settings are automatic, but you can also
adjust the output volume of the range of each connected speaker to suit your own
preferences. You can adjust the volume of the different sound ranges for each
of the speakers. You can set three different equalizers in Preset 1 to 3. You can
select up to 4 bands for the Subwoofer and 9 bands for all other speakers.
Setting Item Default Value
Front Left 0.0 dB
Center 0.0 dB
Front Right 0.0 dB
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Contents Connections
≫
Setting Item Default Value
Height 1 Left 0.0 dB
/ , adjust
Height 1 Right 0.0 dB
/ , adjust
/ , adjust
140
Playback
≫
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
/ , adjust
/ .
/ , adjust
/ .