Connecting An Av Component In A Separate Room (Multi-Zone Connection); Connecting A Pre-Main Amplifier (Zone 2) - Pioneer VSX-LX303 Instruction Manual

Connecting an AV Component in a Separate Room (Multi-zone Connection)

Connecting a Pre-main Amplifier (ZONE 2)

a
BD/DVD
a Analog audio cable, b Digital optical cable
Contents
OR
b a
LINE
IN
Premain Amp.
Connections
≫
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing 7.1-ch
playback in the main room (where this unit is located). Connect the ZONE 2 PRE/
LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or
power amplifier in a separate room with an analog audio cable. The same source
can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
• To output audio from an externally connected AV component to ZONE 2, use
either a digital coaxial cable, digital optical cable or analog audio cable for
connection. Also, the audio from externally connected AV components can be
output to ZONE 2 only when the audio is analog or 2ch PCM signal. When
the AV component is connected to this unit with a digital coaxial cable or
digital optical cable, change the audio output of the AV component to the PCM
output.
53
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫