Pioneer VSX-LX503 Instruction Manual page 99

Switch remote control mode (ZONE 2)
Setting the ZONE
control mode (ZONE 2)
Setting the main room
control mode
Contents Connections
≫
At the time of purchase, the remote controller is in the mode to control playback
in the main room. To play a source in ZONE 2, set the remote controller to the
ZONE control mode (ZONE 2). To control the main room play again, restore the
remote controller to the main room control mode.
1. While pressing and holding MODE, press ZONE 2 at least 3 seconds until the
remote indicator blinks twice.
• The mode of the remote controller switches to the mode to control ZONE 2.
• To restore the main room control mode, while pressing and holding MODE,
press MAIN at least 3 seconds until the remote indicator blinks once.
Setting the ZONE control mode
(ZONE 2)
ZONE 2
99
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫ ≫
Setting the main room control
mode
MAIN
MODE
Setup
≫
MODE