Power - Pioneer VSX-LX503 Instruction Manual

1. INPUT SELECTOR dial: Switch the input to be played.
2. MCACC indicator: This lights when you have enabled the speaker calibration
made with MCACC. ( p139, 156)
3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to
turn the display off.
4. INFO button: Switches the information on the display. (
5. ZONE 2 ON/OFF button: Turns ZONE 2 ON/OFF. (
6. ZONE 3 ON/OFF button: Turns ZONE 3 ON/OFF.(
7. ZONE CONTROL button: Controls the multi-zone function. (
8. MULTI-ZONE MUSIC button: Enables the MULTI-ZONE MUSIC function to
play the same source in all the multi-zone connected rooms. (
9. Display ( p8)
10. Listening mode button: Press "AUTO/DIRECT", "SURROUND" or "STEREO"
to switch the listening mode. (
11. NETWORK indicator: This lights when "NET" is selected with the input selector
and the unit is connected to the network. If the unit is in standby mode, this
lights when functions such as HDMI CEC and network standby are enabled. It
does not light when ZONE 2/ZONE 3 is on, however.
12. Remote control sensor: Receives signals from the remote controller.
• The signal range of the remote controller is within about 16´/5 m, at an
angle of 20° on the perpendicular axis and 30° to either side.
13. WIRELESS indicator: Lights when the unit is connected to the wireless
network and when connected to a BLUETOOTH enabled device.
14. MASTER VOLUME
15. STANDBY/ON button
16. ADJUST button: Settings such as "Tone" and "Level" can be made quickly
during play on the TV screen. (
17. HOME button: Displays the Home. (
18. Cursor buttons ( / / / ) and ENTER button: Select the item with the
cursors and press ENTER to confirm. Use them to tune to stations when using
TUNER. ( p93)
19. RETURN button: Returns the display to the previous state.
20. TUNING MODE button: Switches the tuning mode. (
21. PHONES jack: Headphones with a standard plug (ø1/4"/6.3 mm) are
connected.
22. MCACC SETUP MIC jack: The supplied speaker setup microphone is
connected.( p139, 156)
p105)
p101)
p101)
p101)
p102)
p103)
p147)
p117, 138, 143)
p93)
Contents Connections
≫
23. PHASE CONTROL button: This turns on or off the Phase Control that corrects
phase disturbance in the low range to enhance the bass. (
24. USB port: A USB storage device is connected so that music files stored in it
can be played. (
devices with a USB cable.
25. AUX INPUT HDMI jack: Connect a video camera, etc. using an HDMI cable.
( p65)
26. DIMMER button: You can switch the display off or adjust the brightness of the
display in three steps.
27. Front flap
7
Front
Playback
≫
p83) You can also supply power (5 V/500 mA) to USB
Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p148)