Pioneer VSX-LX503 Instruction Manual page 125

Setting Item Default Value Setting Details
Height 2 Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Height 2 Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Surround Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Surr Back Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Surr Back Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Surround Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Contents Connections
≫
„ Channel Level
Adjust the volume level of each speaker.
Setting Item Default Value
Front Left 0.0 dB
Center 0.0 dB
Front Right 0.0 dB
Height 1 Left 0.0 dB
Height 1 Right 0.0 dB
Height 2 Left 0.0 dB
125
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
≫