Pioneer VSX-LX503 Instruction Manual page 43

„ 5.1 Channel System + ZONE SPEAKER
MAIN ROOM
3
2 1
6
5 4
ZONE 2 ZONE 3
8 7 bk 9
MAIN ROOM: This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation"
( p14).
ZONE 2/ZONE 3: You can enjoy 2-ch audio in the separate room (ZONE 2/ZONE 3) while performing 5.1-ch playback in
the main room (where this unit is located). The same source can be played back in the main room and ZONE 2/ZONE 3
simultaneously. Also, different sources can be played back in both rooms. To output audio from an externally connected
AV component to ZONE 2, use either an HDMI cable, digital coaxial cable, digital optical cable or analog audio cable for
connection. ( p66)
To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Note
that ZONE 3 output is not possible with the connection using a HDMI cable, digital coaxial cable, or digital optical cable.
Contents Connections
≫
43
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p156)
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: Zone 2 or Zone 2/
Zone 3
• Bi-Amp: No
≫