What's In The Box - Master MH-45-KFA User's Manual & Operating Instructions

Cord Wraps (Optional)
10 mm Screws (2)
WHAT'S IN THE BOX (140T-KFA / 190T-KFA / 215T-KFA)
Tip: Be sure to remove the axle from the side of the
Styrofoam packaging.
Tip: Use a power screwdriver and locking wrench
for easier assembly.
50 mm Screws (4)
Axle Nuts (2)
Heater (1)
- Remove the heater and all packaging materials
from the shipping carton
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHAT'S IN THE BOX (45-KFA / 80T-KFA)
Carry Handle (1)
15 mm Screws (2)
30 mm Screws (4)
Spacers (2)
Front Handle
WHILE CONNECTED TO A POWER SOURCE
Shown With Optional Cord
Wraps
Tools Needed:
- Phillips Head Screw Driver
- 8 mm open end wrench
- 19 mm open end wrench
8 mm Nuts (8)
Note: Save the box and packaging materials
for future storage.
4
Kerosene Forced Air Heater User's Manual
Heater (1)
Wheels (2)
Rear Handle
Wheel Support Frame
Axle