Return Settings To Defaults; Return Settings To Default - Glendinning EEC4 Installation Manual

32
EEC4 Installation Manual
Return System Settings to Default Option
The Return System Settings to Default Option allows you to return the system to it's factory default set-
tings.
To Change System Startup Setting Follow These Steps:
ACTION
Press ACTIVE
10 times for
Return to
Defaults Option
Press
WARM to
save option
selection
Enter Configuration Mode as described in section 2.4A (pg. 29)
You may continue to other configuration options
on the preceding pages or you may choose to
EXIT CONFIGURATION MODE by turning
system OFF, moving control handles back to
NEUTRAL, and then turn system ON again.
RESULT
ACTIVE & STBD Neutral LEDs will
begin to flash