Harness - Cummins Qsb / Qsc - Glendinning EEC4 Installation Manual

18
EEC4 Installation Manual
ETS Control System Harnesses - Cummins
DC Power Harness
(Noise Supression devices)
Throttle/ Gear / Start Interlock / CP Enable Harness
Control Process End
Duetsch 12 pos. Grey
Control Process End
Duetsch 8 pos. Black
Station Cable
Station Cable
Station Cable
Station Cable
30' long (9 meters)
C P End
Duetsch 4 pos. Black
20ft. long 6 meters
30ft. long 9 meters
40ft. long 12.2 meters
60 ft. long 18.3 meters
Batt. Neg.
Terminating Resistor
Connector is the
same on both ends
Battery Positive #1
(Red wire)
Battery Positive #2
(Red wire)
Battery Negative
(yellow wire)
20' long (6 meters)
Solenoid Valve
Connectors
- with LED indicators
Batt Pos.
Start Interlock
(Deutsch 2 pos.)
Start Up Enable
(Deutsch 4 pos.)
Aux. Jumper from
engine connector
installed here
(Deutsch 4. pos.
receptacle)
Cummins Throttle
Input Connector
(Packard 3 pos.)
(DIN type shown
Metripack optional)