Shutdown; Led And Alarm Indicators - LEGRAND KEOR MULTIPLUG 600 VA Installation Manual

4.3

Shutdown

1. Press and hold the ON/OFF button until the blue led turns off.
2. The UPS stops powering the back-up outlets.
3. Unplug the UPS from the mains power supply socket to stop powering also the overvoltage
protected outlets.
4.4

LED and Alarm Indicators

NORMAL MODE/
BATTERY MODE LED
Steady
LED blinking every 3
seconds
LED blinking every 3
seconds
LED blinking every 2
seconds
Steady
OFF
Steady
OFF
ALARM
ALARM
LED
OFF OFF
OFF OFF
1 beep every 10
OFF
seconds
1 beep every 2
OFF
seconds
OFF Intermittent
Continuously
Steady
sounding
1 beep every 10
Steady
seconds
Continuously
Steady
sounding
KEOR MULTIPLUG
600 VA - 800 VA
UPS STATUS
The UPS is operating in normal mode
UPS operating in battery mode with
battery status 40%-100%
UPS operating in battery mode with
battery status 20%-40%
UPS operating in battery mode with
battery status <20%
Overload in normal mode
UPS shutdown due to prolonged
overload
Battery fault
UPS fault (other than overload)
25