Visit Radioddity.com For Downloads And Help
The radio is compatible with other accessories which are available on:
https://www.radioddity.com/
Notice
Please make sure to install the antenna and battery is charged when start using a radio.
Antenna
This transceiver is fitted with a Male SMA connector. To mount your antenna (Female SMA
connector), align the two connectors and turn clockwise until it stops.
04
Visit Radioddity.com For Downloads And Help
●
Do not over-tighten your antenna to avoid damage to the outer
materials and the connect base.
●
When installing the antenna, please remember to grip it by the
base and screw.
●
When you choose using an external antenna, make sure its SWR
is about 1.5:1 or lower to avoid damage to the transceiver.
●
Do not hold the antenna with your hand or wrap the outside of it to
avoid interference to the transceiver.
●
Never transmitting without an antenna.
Belt clip
There are two parallel screws mounted on rear radio body, remove
them and thread through the holes on the belt clip as you screw
them back into the radio body.
Do not add any form of glue to fix the screws on the
battery clip.The solvents in the glue may cause damage
to the battery casing.
05