Infrared Receive - Samsung SPH-i700 Series User Manual

negative number, enter the number first and then press the
+/- button.
M+
• - The "M+" button places the current number in
memory. Each new number you enter with the M+ button is
added to the total stored in memory. The number that you
add can be either a calculated value or any number you enter
by pressing the number buttons. Pressing this button has
no effect on the current calculation (or series of
calculations); it merely places the value into memory until it
is recalled.
MR
• - The "MR" button recalls the stored value from memory
and inserts it in the current calculation.
MC
• - The "MC" button clears any value that is stored in the
Calculator memory.

Infrared Receive

Infrared Receive or IR is used to receive files between
two IR devices. In most cases, you can also receive
files from your PC when it is equipped with an IR port.
The two devices are aimed at each other approximately
four inches apart.
If you have difficulty getting the two devices to send or
receive information, try the following:
• Transfer only one file at a time. No more than 25 contacts
should be done at once.
• Make sure that the IR port windows are clear and free of any
dirt or obstacles.
• Adjust the room lighting or move to another location. Some
types of lighting may interfere with the transmission.
Chapter 16 - Other Applications
129