Fronius Personal Display DL Operating Instructions Manual page 82

System monitoring
Hide thumbs Also See for Personal Display DL:
Table of Contents

Advertisement

Available languages

Available languages

Remedy:
Cause:
Remedy:
Cause:
Remedy:
The Fronius Personal Display DL does not find a Fronius Personal Display DL Box
in 'ADD IG' search mode
Cause:
Remedy:
ADD IG --
(for 'ADD IG' search mode)
Cause:
Remedy:
Cause:
Remedy:
ERROR IGxx
(for 'ADD IG' search mode)
Cause:
Remedy:
ERROR BATT
Power supply unit plugged in, battery charging operation
Cause:
Remedy:
FULL LIST
(for 'ADD IG' search mode)
Cause:
80
Check inverter numbers and correct if necessary according to
the inverter operating instructions.
The inverter is not in range of the wireless connection.
Check the wireless connection range
There is a one-sided wireless pairing between a Fronius Per-
sonal Display Card and the Fronius Personal Display DL
Reset the Fronius Personal Display Card in the inverter
There is a one-sided wireless pairing between a Fronius Per-
sonal Display DL Box and the Fronius Personal Display DL
(e.g., after replacing the Fronius Personal Display)
Select the 'ADD IG' menu item in the Setup menu of the
1
Fronius Personal Display DL
Disconnect and then reinsert the Solar Net cable at the Fro-
2
nius Personal Display DL Box
Press the 'Enter' key within 10 seconds on the Fronius Per-
3
sonal Display DL
DC power to the inverter has been interrupted.
Check the DC-side inverter power supply.
Old firmware version for inverter
Update the firmware
The address number assigned to the inverter is higher than 15.
Check inverter number and correct if necessary according to
the inverter operating instructions.
Incorrect or faulty batteries were inserted.
Check batteries
15 Fronius inverters are already integrated into the system.

Advertisement

Table of Contents
loading

Table of Contents