Appendix J: Linkoem Pin Outs; Figure 29: Linkoem Pin Outs - iButtonLink LINK 12 User Manual

A J: LinkOEM Pin Outs
PPENDIX
Form factor is 24 Pin DIP with 0.600 inch spacing. This follows JEDEC 24 pin 0.6" standards.

Figure 29: LinkOEM Pin Outs

4 – RB7/PGD used for programming (Pic
6 – Master Clear used for programming and
The LINK™ Family Manual
Version 1.6 ©iButtonLink, LLC 2016
1 – OW Bus (repeated on 23)
2 – Vcc +5V (repeated on 24)
pin 23)
5 – RB6/PGC used for programming (Pic
pin 24)
reset (Pic pin 1)
10 – Auxiliary
11 – Serial Receive Data
12 – Vss (Return)
13 – Vss (Return)
14 – Serial Transmit Data
X – I2C Clock (Pin 14 – Rc3/SCK/SCL)
Y – I2C Data (Pin 15 – RC4/SDI/SDA)
23 – OW Data (repeated on 1)
24 – Vcc +5V (repeated on 2)
Page 67