Byte Mode - iButtonLink LINK 12 User Manual

Byte Mode

Command " b " (lowercase B)
Command Compatible With:
LinkUSB
This command places the LINK
be taken as a hexadecimal byte value that is issued onto the bus. The response byte is then
displayed in hexadecimal. Subsequent pairs of hexadecimal characters will also generate bytes,
allowing for streaming of bytes without intervening commands.
Hitting ENTER (carriage return) will end byte mode.
For The LinkHub-E, " x " will also end byte mode.
S C
IMILAR OMMANDS
• " j " – Bit Mode
• " ~ " - Bit Mode with Strong Pull-Up
• " p " – Byte Mode with Strong Pull-Up
TM
devices into byte mode. The next two characters entered will
:
The LINK™ Family Manual
Version 1.6 ©iButtonLink, LLC 2016
Link | LinkHub-S | LinkHub-E | LinkOEM |
Page 21