Appendix G: Linkhub-S External Wiring Diagram; Power Supply; Figure 23: Standard Eia/Tia 568 B Rj-45 Colors; Figure 24: Linkhub-E +12 V Dc Power Supply Connector - iButtonLink LINK 12 User Manual

A G: LinkHub-S External Wiring Diagram
PPENDIX
Pin outs viewed looking into the LinkHub-S external 1-Wire® port.
Wire colors are standard for cat 5 cable

Figure 23: Standard EIA/TIA 568 B RJ-45 Colors

Used with thanks to Lp for public domain image:
Pin
1
2
3
4
5
6
7
8

Power Supply

The LinkHub-S uses a barrel type connector with negative to the
center post, dimensions: OD:5.5 mm, ID:2.5 mm, Length: 11.8mm.
Nominal +12 V DC supply is required with an acceptable supply range
of range of 9-15 volts DC.A regulated supply is preferred. A minimum
supply current output of 250 mA is required with 500 mA recommended
for additional power to 1-Wire® network devices. A 500 mA +12V DC
supply with international certifications and various country AC power plugs is available from
iButtonLink: http://www.ibuttonlink.com/pages/power-supplies
https://upload.wikimedia.org/wikipedia/commons/6/60/RJ-45_TIA-
568B_Left.png
Connection
Ground
+5V Power Out
*Limited to 50mA
Ground
1-Wire® Data
Ground
Auxiliary
V+ (+12VDC)
Ground
The LINK™ Family Manual
Version 1.6 ©iButtonLink, LLC 2016
Cable Color
Orange and White
Orange
Green and White
Blue
White and Blue
Green
White and Brown
Brown
Figure 24: LinkHub-
E +12 V DC Power
Supply Connector
Page 62